The Application of Statistical Design of Experiments to Study the In-Plane Shear Behaviour of Hybrid Composite Sandwich Panel
:
https://doi.org/10.9744/ced.18.1.25-30
Keywords:
Design of experiment, hybrid composite, in-plane shear, sandwich panel, statistical analysis.Abstract
This paper presents a statistical aspect of experimental study on the in-plane shear behaviour of hybrid composite sandwich panel with intermediate layer. The study was aimed at providing information of how significant the contribution of intermediate layer to the in-plane shear behaviour of new developed sandwich panel. The investigation was designed as a single factor experimental design and the results were throughly analysed with statistics software; Minitab 15. The panels were tested by applying a tensile force along the diagonal of the test frame simulating pure shear using a 100 kN MTS servo-hydraulic UTM. The result shows that the incorporation of intermediate layer has sinificantly enhanced the in-plane shear behaviour of hybrid composite sandwich panel. The statistical analysis shows that the value of F0 is much higher than the value of Ftable, which has a meaning that the improvement provided by the incorporation of intermediate layer is statistically significant.References
Fajrin, J., Zhuge, Y., Bullen, F., and Wang, H., The Implementation of Statistical Inference to Study the Bending Strength of Sustainable Hybrid Sandwich Panel, Advanced Material Research, 250-253, 2011, pp. 956-961. [CrossRef]
Fajrin, J., Zhuge, Y., Bullen, F., and Wang, H., Significance Analysis of Flexural Behaviour of Hybrid Sandwich Panels, Open Journal of Civil Engineering, 3, 2013, pp. 1-7. [CrossRef]
Mamalis, A.G., Spentzas, K.N., Pantelelis, N.G., Manolakos, D.E., and Ionnidis, M.B., A New Hybrid Concept for Sandwich Structures, Composite Structures, 83, 2008, pp. 335-340. [CrossRef]
Fajrin, J., Alternative Theoretical Frameworks for Hybrid Sandwich Panel with Intermediate Layer, Jurnal Rekayasa Sipil, 11(2), 2015, pp 1-11. [CrossRef]
Montgomery, D.C., Design and Analysis of Experiment, John Wiley & Sons Publications, Arizona-USA, 2009. [CrossRef]
Montgomery, D.C. and Runger, G.C., Applied Statistics and Probability for Engineers, John Wiley & Sons Publications, Arizona-USA, 2003. [CrossRef]
Gunsch, J., What is Statistical Significance?, Available from: www.wisegeek.org, 2013. [CrossRef]
Fajrin, J., Zhuge, Y., Bullen, F., and Wang, H., Improving The Quality of Experimental Research in Civil Engineering by Employing Statistical Design of Experiments; A Case Study in Developing Composite Hybrid Sandwich Panel, Proceeding of The 14th Quality in Research, Lombok, Indonesia, 10-13 August 2015. [CrossRef]
Phoenix, S.L., Schwartz, P., and Robinon, H.H., Statistics for the Strength and Lifetime in Creep-Rupture of Model Carbon/Epoxy Composites, Composite Science and Technology, 32(2), 1988, pp. 81-120. [CrossRef]
Phoenix, S.L., Statistical Issue in the Fracture of Brittle-Matrix Fibrous Composites, Composite Science and Technology, 48(1-4), 1993, pp. 65-80. [CrossRef]
Bayerlein, I.J. and Phoenix, S.L., Statistics for The Strength and Size Effects of Microcomposites with Four Carbon Fibers in Epoxy Resin, Composite Science and Technology, 56(1), 1996, pp. 75-92. [CrossRef]
Toutanji, H.A., El-Korchi, T., and Katz, R.N., Strength and Reliability of Carbon Fiber Reinforced Cement Composites, Cement and Concrete Composite, 16(1), 1994, pp. 15-21. [CrossRef]
Alhozaimy, A.M., Soroushian, P., and Mirza, F., Mechanical Properties of Polypropylene Fiber Reinforced Concrete and The Effects of Pozzolanic Materials, Cement and Concrete Composite, 18(2), 1996, pp. 85-92. [CrossRef]
Balzer, B. and McNabb, J., Significant Effect of Microwave Curing on Tensile Strength of Carbon Fiber Composites, Journal of Industrial Technology, 24(3), 2008, pp. 2-8. [CrossRef]
Jun, Z., Wang, X., Chang, J., and Zheng, K., Optimization of Processing Variables in Wood Rubber Composite Panel Manufacturing Technology, Journal of Bioresource Technology, 99(7), 2008, pp. 2384-2391. [CrossRef]
Mathivanan, N.R., Jerald, J., and Behera, P., Analysis of Factors Influencing Deflection in Sandwich Panels Subjected to Low-Velocity Impact, International Journal Advance Manufacture Technology, 52, 2011, pp. 433–441. [CrossRef]
Shahdin, A., Mezeix, L., Bouver, C., Morlier, J., and Gourinat, Y., Fabrication and Mechanical Testing of Glass Fiber Entangled Sandwich Beams: A Comparison with Honeycomb and Foam Sandwich Beams, Composite Structures, 90(4), 2009, pp.404-412. [CrossRef]
Dwivedi, U.K., Ghosh, A., and Chand, N., Abrasive Wear Behaviour of Bamboo Powder Filled Polyester Composites, Bio-Resources, 2(4), 2007, pp. 693-698. [CrossRef]
Satapathy, A. and Patnaik, A., Analysis of Dry Sliding Wear Behaviour of Red Mud Filled Polyester Composites using the Taguchi Method, Journal of Reinforced Plastics and Composites, 29(19), 2010, pp. 2882-2897. [CrossRef]
Davim, J.P. and Reis, P., Study of Delamination in Drilling Carbon Fiber Reinforced Plastics (CFRP) using Design Experiments, Composite Structures, 59(4), 2003, pp. 481-487. [CrossRef]
Prasad, V., Joy, A., Narayanan, S., and Rajakumar, S., Finite Element Analysis of Jute and Banana Fiber Reinforced Hybrid Polymer Matrix Composite and Optimization of Design Parameters Using ANOVA Technique, Procedia Engineering, 97, 1994, pp. 1116-1125. [CrossRef]
Venkateshwarah N., Elayaperumal A., and Sathiya G. K., Prediction of Tensile Properties of Hybrid-Natural Fiber Composites, Composites Part B: Engineering, 43(2), 2012, pp. 793-796. [CrossRef]
El-Shekeil, Y.A., Sapuan, S.M., Azaman, M.D., and Jawaid, M., Optimization of Blending Parameters and Fiber Size of Kenaf Bast Fiber Reinforced the Thermoplastic Polyurethane Composites by Taguchi Method, Advances in Materials Sciences and Engineering, 2013, Article ID 686452, doi: 10.1155/2013/ 686452. [CrossRef]
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:- Authors retain the copyright and publishing right, and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) followingthe publication of the article, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
