Compressive Strength of Post Fire Exposed Concrete Column Wrapped with Fiber Reinforced Polymer
:
https://doi.org/10.9744/ced.19.2.105-110
Keywords:
Curing, fire exposed concrete column, fiber reinforced polymer.Abstract
In this study, behaviour of reinforced concrete columns strengthened using fiber reinforced polymer (FRP; glass fiber and carbon fiber) after fire exposure are discussed. After being exposed to fire as high as 720oC for 180 minutes, the specimens showed concrete and reinforcement strength degradation, even though there was no carbonation. It was found that specimens wrapped by carbon fiber showed better compressive strength but less ductility compared to specimens wrapped by glass fiber. It was also found that the low initial compressive strength did not decrease FRP confinement effectiveness. Increase of wrapped concrete compressive strength was evident despite the low initial strength (<17 MPa). Strength estimation using ACI 440.2R-08 formula, which is originally for wrapped plain concrete without fire heat exposure, underestimated the compressive strength. In the proposed formula, the initial compressive strength (f’co) should be adjusted by considering the modulus elasticity and strain limitation to have more precise estimation.
References
1. Saafi, M., Toutanji H., and Li, Z., Behavior of Concrete Columns Confined with Fiber Reinforced Polymer Tubes, ACI Materials Journal, 96(4), 1999, pp. 500-509. [CrossRef]
Lam, L. and Teng, J.G., Design-oriented Stress–Strain Model, Journal of Reinforced Plastics and Composites, 22(13), 2003, pp. 1149–1186. [CrossRef]
Lee, C.S., Hegemier, G.A., and Phillippi, D.J., Analytical Model for Fiber Reinforced Polymer Jacketed Square Concrete Columns in Axial Compression, ACI Structural Journal, 107(2), 2010, pp. 208–217. [CrossRef]
ACI 440.2R-08, Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, American Concrete Institute, 2008. [CrossRef]
Bisby, L.A., Chen, J.F., Li, S.Q., Stratford, T.J., Cueva, N., and Crossling, K., Strengthening Fire Damaged Concrete by Confinement with Fiber-Reinforced Polymer Wraps, Engineering Structures, 33(12), 2011, pp. 3381–3391. [CrossRef]
Wardaya, D.A.S., Analisa Rumus Empiris Kuat Tekan Kolom dengan Penggunaan Fiber Reinforced Polymer pada Kondisi: Non Fire exposed, Fire exposed-Curing, dan Fire exposed Non Curing, Unpublished Graduate Theses, Petra Christian University, 2016. [CrossRef]
Badan Standarisasi Nasional, SNI 03-2847-2002: Tata Cara Perhitungan Struktur Beton Untuk Bangunan Gedung, 2002. [CrossRef]
Badan Standarisasi Nasional, SNI 03-1736-2000: Tata Cara Perencanaan Sistem Proteksi Pasif Untuk Pencegahan Bahaya Kebakaran pada Bangunan Rumah dan Gedung, 2000. [CrossRef]
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:- Authors retain the copyright and publishing right, and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) followingthe publication of the article, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
